<meter id="nbrfp"></meter>

            <dfn id="nbrfp"><address id="nbrfp"><dfn id="nbrfp"></dfn></address></dfn>

                    <mark id="nbrfp"></mark>
                      Gear Oil Pumps | Hot Oil Pumps
                      Hot??
                      diesel oil transfer pump|Explosion-proof gear pump|Jacketed screw pump|KCB stainless steel gear pump

                      Epoxide resin pump

                       
                      Epoxide resin pump
                       
                      Summary
                      Epoxy resin pump is mainly used for conveying epoxy resin. The pump is characterized by low revolution, smooth operation and long service life. The pump body is provided with a heat preservation device to heat and transport the resin in th
                      Detail Introduction
                      Epoxy resin pump is mainly used for conveying epoxy resin. The pump is characterized by low revolution, smooth operation and long service life. The pump body is provided with a heat preservation device to heat and transport the resin in the pump. Our company developed and produced this kind of heat preservation resin pump in 2002, conveying viscosity range: 10-300000CST.
                       
                      Product structure and features: first, by means of heat conduction oil or steam through the pump body, such as heat preservation jacket of the resin to heating melting inside the pump, for convenient transportation, is also an excellent resistance to high temperature of pump at the same time, through the belt or reduce motor reducer such as device original revolutions, such transport up more smoothly, longer service life.
                       
                      Epoxy resin pump structure: mainly composed of pump body (with insulation), internal and external rotor, bracket, pump cover, seal, shaft and other parts, the structure is more complex than ordinary gear pump or centrifugal pump. Motor and pump are connected by belt or coupling, small flow of resin pump with thread connection, slightly large flow of flange link,
                       
                      Performance parameter table:

                       
                      宥mm
                       
                      尖電楚
                      L/100rev
                      娚業
                      cSt
                      D堀
                      r/min
                      魂(MPa)
                      B俊侘塀
                      0.4
                      0.6
                      0.8
                      1.0

                      S孔楕(kw)送楚(L/min)

                      NYP0.78
                      15
                      0.78
                      20
                      1390
                      0.17/9.3
                      0.23/9.0
                      0.28/8.8
                      0.32/8.6
                      G1/2"
                      60
                      1390
                      0.18/9.5
                      0.24/9.2
                      0.28/9.0
                      0.33/8.9
                      200
                      1390
                      0.31/10.4
                      0.35/10.2
                      0.39/10.0
                      0.43/9.9
                      600
                      1390
                      0.39/10.4
                      0.44/10.3
                      0.48/10.3
                      0.52/10.2
                      2000
                      910
                      0.23/6.8
                      0.27/6.8
                      0.30/6.8
                      0.33/6.7
                      6000
                      720
                      0.24/5.4
                      0.31/6.1
                      0.30/6.8
                      0.40/6.8
                      NYP2.3
                      25
                      2.3
                      20
                      1400
                      0.38/28.4
                      0.49/27.5
                       
                       
                      G1"
                      60
                      1400
                      0.59/29.2
                      0.65/28.8
                       
                       
                      200
                      1400
                      0.61/30.0
                      0.72/29.6
                       
                       
                      600
                      1400
                      0.92/31.9
                      0.96/31.7
                       
                       
                      2000
                      910
                      0.61/19.9
                      0.68/19.7
                       
                       
                      6000
                      720
                      0.77/16.32
                      0.83/16.2
                       
                       
                      NYP3.6
                      40
                      3.6
                      20
                      1450
                      0.69/46.7
                      0.94/45.9
                      1.18/45
                      1.44/43.4
                      隈m
                      Flange
                      60
                      1450
                      0.81/47.5
                      1.09/46.7
                      1.37/45.9
                      1.57/44.7
                      200
                      1450
                      1.06/49.7
                      1.31/49.2
                      1.56/48.8
                      1.79/47.3
                      600
                      1450
                      1.45/49.9
                      1.61/49.6
                      1.77/49.3
                      1.93/49
                      2000
                      960
                      1.28/34.3
                      1.41/33.8
                      1.54/33.7
                      1.65/33.6
                      6000
                      640
                      1.08/23.0
                      1.18/22.9
                      1.28/22.9
                      1.37/22.8
                      20000
                      583
                      1.22/20.5
                      1.24/20.4
                      1.25/20.4
                      1.38/20.3
                      60000
                      455
                      0.84/16.3
                      0.91/16.2
                      0.98/16.1
                      1.01/16
                      NYP7.0
                      NYP7.0A
                      (圻侏:
                      NYP3
                      NYP3A)
                      40
                      7.0
                      20
                      1450
                      1.36/98.1
                      1.8/96
                      2.0/94.7
                      2.4/93
                      苔y
                      Thread
                      60
                      1450
                      1.45/99
                      1.9/97
                      2.2/96.4
                      2.6/95
                      200
                      1450
                      1.62/99.8
                      2.0/98
                      2.3/97.5
                      2.7/97
                      600
                      960
                      1.4/62
                      1.6/65
                      1.8/44
                      2.0/64
                      2000
                      960
                      1.8/67
                      2.0/66
                      2.3/65
                      2.6/65
                      6000
                      640
                      1.5/44.5
                      1.7/44
                      1.8/44
                      2.0/44
                      20000
                      583
                      1.6/40.5
                      1.9/40
                      2.1/40
                      2.2/40
                      60000
                      455
                      1.46/31.5
                      1.8/31
                      1.9/31
                      2.0/31
                      NYP24
                      50
                      24
                      20
                      720
                      1.8/165
                      2.3/161
                      2.8/158
                      3.4/155
                      隈m
                      Flange
                      60
                      720
                      2.0/166
                      2.6/164
                      3.1/162
                      3.7/158
                      200
                      610
                      1.9/143
                      2.5/141
                      3.0/139
                      3.5/136
                      600
                      541
                      2.1/127
                      2.6/125
                      3.0/124
                      3.5/122
                      2000
                      475
                      2.2/112
                      2.6/111
                      2.9/110
                      3.4/109
                      6000
                      357
                      2.0/85
                      2.3/84
                      2.6/83
                      2.9/83
                      20000
                      303
                      1.9/72
                      2.2/72
                      2.4/72
                      2.6/71
                      60000
                      228
                      1.6/54
                      1.8/54
                      2.0/54
                      2.3/54
                      NYP52
                      NYP52A
                      (圻侏:
                      NYP10
                      NYP10A)
                      50
                      52
                      20
                      720
                      4.3/362
                      5.8/355
                      6.9/348
                      8.1/340
                      苔y
                      Thread
                      60
                      720
                      4.7/364
                      6.2/358
                      7.3/352
                      7.5/346
                      200
                      610
                      4.6/309
                      5.9/304
                      6.9/300
                      8.0/294
                      600
                      541
                      4.9/275
                      6.0/271
                      6.8/268
                      7.8/264
                      2000
                      475
                      5.0/243
                      5.9/238
                      6.6/237
                      7.6/235
                      6000
                      357
                      4.1/184
                      4.9/182
                      5.3/181
                      6.2/180
                      20000
                      303
                      3.8/157
                      4.6/156
                      5.1/155
                      5.6/155
                      60000
                      228
                      3.1/119
                      3.7/118
                      4.0/118
                      4.5/118
                      NYP80
                      80
                      80
                      20
                      615
                      5.2/471
                      6.9/461
                      8.5/451
                      10.0/433
                      隈m
                      Flange
                      60
                      615
                      5.5/474
                      7.2/465
                      8.8/457
                      10.5/448
                      200
                      544
                      5.7/421
                      7.2/414
                      8.6/408
                      10.1/401
                      600
                      479
                      6.0/372
                      7.3/367
                      8.5/362
                      9.8/356
                      2000
                      417
                      6.5/326
                      7.7/322
                      8.9/319
                      10.1/315
                      6000
                      305
                      5.6/239
                      6.6/237
                      7.5/326
                      8.4/233
                      20000
                      228
                      5.5/180
                      6.4/179
                      6.9/178
                      7.7/177
                      60000
                      188
                      5.5/149
                      6.1/149
                      6.7/149
                      7.2/148
                      NYP111
                      NYP111A
                      (圻侏:
                      NYP30
                      NYP30A)
                      80
                      111.4
                      20
                      615
                      6.7/660
                      9.2/647
                      11.2/634
                      13.6/622
                      隈m
                      Flange
                      60
                      615
                      6.9/664
                      9.4/652
                      11.5/642
                      13.9/631
                      200
                      544
                      7.1/589
                      9.3/580
                      11.0/573
                      13.2/563
                      600
                      479
                      7.3/521
                      9.5/514
                      11.1/508
                      13.1/502
                      2000
                      417
                      7.7/455
                      9.7/450
                      11.0/447
                      12.7/442
                      6000
                      305
                      6.9/335
                      8.4/332
                      9.4/331
                      10.6/328
                      20000
                      228
                      6.3/251
                      7.5/250
                      8.2/249
                      9.2/248
                      60000
                      188
                      6.2/209
                      7.1/208
                      7.6/208
                      8.5/207
                      NYP160
                      100
                      160
                      20
                      600
                      8.9/930
                      12.1/916
                      15.3/902
                      17.5/888
                      隈m
                      Flange
                      60
                      600
                      9.4/935
                      12.6/922
                      15.8/910
                      19.0/898
                      200
                      550
                      12.3/866
                      15.3/859
                      18.3/852
                      21.3/845
                      600
                      480
                      10.2/754
                      12.8/747
                      15.4/740
                      18.0/737
                      2000
                      355
                      9.1/560
                      11.1/556
                      13/552
                      15.1/548
                      6000
                      319
                      10.0/505
                      11.7/502
                      13.5/500
                      15.2/497
                      NYP220
                      125
                      220
                      20
                      430
                      8.8/902
                      11.9/880
                      15.0/858
                      18.0/836
                      隈m
                      Flange
                      60
                      430
                      9.0/909
                      12.0/890
                      15.0/871
                      18.0/852
                      200
                      355
                      8.5/753
                      11.1/739
                      13.7/726
                      16.3/713
                      600
                      320
                      9.4/682
                      11.8/671
                      14.1/660
                      16.5/649
                      2000
                      254
                      9.1/544
                      11.0/537
                      13.0/530
                      15.1/523
                      6000
                      244
                      10.1/483
                      11.9/478
                      13.6/473
                      15.4/468
                      20000
                      160
                      9.1/347
                      10.5/345
                      11.9/343
                      13.3/341
                      60000
                      117
                      8.4/256
                      9.4/255
                      10.4/254
                      11.4/253
                      NYP320
                      125
                      320
                      20
                      430
                      13.0/1306
                      18.0/1270
                      22.0/1235
                      26.0/1200
                      隈m
                      Flange
                      60
                      430
                      13.0/1316
                      18.5/1285
                      22.0/1255
                      26.5/1225
                      200
                      355
                      11.8/1091
                      15.5/1068
                      19.1/1046
                      22.8/1024
                      600
                      320
                      13.2/987
                      16.5/968
                      19.7/950
                      22.9/932
                      2000
                      284
                      14.2/881
                      17.4/867
                      20.6/854
                      23.8/841
                      6000
                      222
                      13.7/693
                      16.2/684
                      18.7/675
                      21.2/666
                      20000
                      168
                      13.2/529
                      15.3/525
                      17.3/522
                      19.4/519
                      60000
                      125
                      12.0/397
                      13.7/396
                      15.3/395
                      16.9/394
                      NYP650
                      150
                      650
                      20
                      315
                      19.0/1921
                      26.0/1857
                      33.0/1794
                       
                      隈m
                      Flange
                      60
                      315
                      20.0/1940
                      26.4/1886
                      33.2/1832
                       
                      200
                      284
                      17.9/1756
                      24.0/1711
                      30.4/1666
                       
                      600
                      253
                      17.6/1572
                      22.7/1534
                      28.9/1500
                       
                      2000
                      196
                      15.7/1225
                      20.6/1201
                      24.5/1176
                       
                      6000
                      160
                      16.0/1008
                      19.8/993
                      22.3/978
                       
                      20000
                      117
                      13.6/745
                      16.5/738
                      19.2/731
                       
                      60000
                      100
                      15.0/645
                      17.2/643
                      19.5/640
                       
                      NYP727
                      (圻侏:
                      NYP50)
                      150
                      727
                      20
                      315
                      21.5/2135
                      29.4/2058
                      37.3/1980
                       
                      隈m
                      Flange
                      60
                      315
                      22.4/2157
                      29.8/2090
                      37.3/2026
                       
                      200
                      280
                      19.6/1928
                      26.7/1874
                      33.5/1820
                       
                      600
                      245
                      19.6/1696
                      25.1/1652
                      31.2/1611
                       
                      2000
                      200
                      18.7/1394
                      23.3/1363
                      28.5/1334
                       
                      6000
                      170
                      19.2/1195
                      23.3/1175
                      27.9/1155
                       
                      20000
                      125
                      17.0/888
                      20.1/878
                      23.3/868
                       
                      60000
                      100
                      16.8/720
                      19.5/717
                      22.3/713
                       
                      NYP1670
                      200
                      1670
                      20
                      250
                      38.0/3852
                      52.0/3690
                      66.0/3529
                       
                      隈m
                      Flange
                      60
                      250
                      40.0/3900
                      54.0/3763
                      68.0/3626
                       
                      200
                      225
                      37.5/3535
                      50.0/3424
                      62.5/3313
                       
                      600
                      195
                      37.0/3079
                      48.0/2990
                      58.6/2900
                       
                      2000
                      160
                      35.0/2547
                      44.0/2485
                      53.0/2422
                       
                      6000
                      135
                      34.6/2177
                      42.0/2138
                      50.0/2100
                       
                      20000
                      112
                      35.0/1830
                      41.5/1810
                      48.0/1790
                       
                      60000
                      85
                      36.0/1405
                      35.7/1400
                      40.6/1392

                       

                      Related links
                      貧匯鐙Diesel pump
                      和匯鐙Slag pump
                      Browse more abouth剳籌叡|籌叡|隠籌叡|
                      Related Products
                      Quick MenuGear Oil Pumps Hot Oil Pumps | RecommendationDiaphragm Pump AODD & EODD Copyright China pump manufacturer http://www.cqstbg.com Internet Content Provider:11002332-1
                      Address: Industrial Development Zone, Hebei Province Tel0317-8181816
                       
                      少妇被两个黑粗来回进出_大学生无套流白浆视频大全_久久亚洲国产_激情综合激情五月俺也去